| The Size Range of Oily bushing |
| Model | Cylinder | Flange | Sphere | Collared Sphere |
| Drawing |
 |
 |
 |
 |
| d | 3~40mm | 3~40mm | 3~20mm | 3~20mm |
| D | 5~60mm | 5~50mm | 6~30mm | 6~30mm |
| D1 | -- | 8~60mm | -- | 4~24mm |
| h | -- | 1~6mm | -- | 1~6mm |
| H | 3~4mm | 5~40mm | 4~20mm | 4~24mm |
| The Material of Oily bushing |
| Material Code | Elemental
Composition % |
Density g/cm3 |
Oil Content % |
Apparent Hardness HB |
Crushing Strength MPa |
|||||||
| Cu | Fe | Sn | Zn | Pb | C | Other | ||||||
| Copper based | FU CuSn6Zn6Pb3 |
remain | -- | 5~7 | 5~7 | 2~4 | 0.5~2 | <1.5 | 6.2~6.8 | ≥18 | 20~50 | >150 |
| >6.8~7.4 | ≥12 | 30~60 | >200 | |||||||||
| FM CuSn10 |
remain | -- | 8~11 | -- | -- | 0.5~2 | <1.0 | 6.6~7.2 | ≥18 | 25~55 | >150 | |
| >7.2~7.8 | ≥12 | 35~65 | >200 | |||||||||
| Copper-Iron based | FW CuFe15 |
remain | 10~20 | -- | -- | -- | 0.5~2 | <1.0 | 6.2~6.8 | ≥18 | 25~55 | >150 |
| >6.8~7.4 | ≥12 | 35~65 | >200 | |||||||||
| Iron based | FI FeC0.5 |
-- | remain | -- | -- | -- | <0.5 | <3.0 | 5.7~6.2 | ≥18 | 40~80 | >250 |
| >6.2~6.7 | ≥12 | 50~100 | >300 | |||||||||
| Iron-Copper based | FT FeCu3 |
2~5 | remain | -- | -- | -- | <1.0 | <3.0 | 5.7~6.2 | ≥18 | 40~80 | >250 |
| >6.2~6.7 | ≥12 | 50~100 | >300 | |||||||||
| FY FeCu25 |
20~30 | remain | -- | -- | -- | <1.0 | <3.0 | 6.2~6.7 | ≥18 | 40~80 | >200 | |
| >6.2~6.7 | ≥12 | 50~100 | >250 | |||||||||
| Iron-Copper-Pb based | FL FeCu3Pb6 |
2~5 | remain | -- | -- | 5~7 | <1.0 | <3.0 | 6.2~6.7 | ≥18 | 35~70 | >150 |
| >6.7~7.2 | ≥12 | 40~80 | >200 | |||||||||
| Iron-Pb based | FO FePb2.5 |
-- | remain | -- | -- | 2.5 | <1.0 | <3.0 | 5.7~6.2 | ≥18 | 35~70 | >150 |
| >6.2~6.7 | ≥12 | 40~80 | >200 | |||||||||
