Filtration Precision comparison table
meshes per square inch (MSI) diameter of bronze's ball (mm) filter precision (μm)
20-30 0.6-0.9 100-120
28-40 0.45-0.63 70-100
40-60 0.28-0.45 50-70
60-80 0.18-0.28 40-50
80-100 0.135-0.18 20-40
100-120 0.125-0.135 10-20
240-300 0.054-0.063 5-10


Material Data Sheet:   Bronze powder, Bronze ball

Material No. Cu Sn Zn Pb Other
Bronze CuSn6Zn6Pb3 Balance 5~7% 5-7% 2~3% ≤1%
Bronze CuSn6Zn6Pb0 Balance 5~7% 5~7% 0 ≤1%


Material Data Sheet:   Stainless Steel powder, stainless ball


Material No. Chemical Compositions  Mechanical properties
C(max)
%		 Mn(max)
%		 P(max)
%		 S (max)
%		 Si(max)
%		 Ni
%		 Cr
%		 Mo
%		 T.S (min)
psi (kg/mm2)		 Y.S (min)
psi (kg/mm2)		 EL.(min)
%		 Red (min)
%
AISI-304 0.08 2.00 0.040 0.030 1.00 8.0-11.0

 18- 20

 -- 75.000
(52.7)		 30.000
(21.1)		 45 50
AISI-304L 0.035 2.00 0.040 0.030 1.00 8.0-13.0 18-20 -- 70.000
(49.2)		 25.000(17.6) 30 50
AISI-316 0.08 2.00 0.040 0.030 1.00 10.0-14.0 16-18 2.0-3.0 75.000
(52.7)		 30.000
(21.7)		 45 50
AISI-316L 0.035 2.00 0.040 0.030 1.00 10.0-15.0 16-18 2.0-3.0 65.000
(45.7)		 25.000
(17.6)		 30 50


QXS-A, QXS-B, QXS-SC, QXS-SCQ,  Series Muffler
specification
"S" data		 working medium
nominal flux		 working pressure circulation capacity noise elimination effect
-2.5 compressed air 0 -- 0.8(Mpa) 5 200 ≥20(DB)
-6 20 960
-8 40 1920
-10 60 2880
-15 110 5280
-20 190 9120
-25 300 10000
-32 400 19200 ≥25(DB)
-40 650 31200
-50 700 33600


QXJ-A, QXJ-B, QXJ-C, QXJ-PDK  Series Muffler
specification nominal flux working pressure working medium working temperature flux on pressure at 0.6mpa  air outlet noise pressure 0.6mpa (outside 1 meter)
G1/8"M10X1 Ф4 0 -- 1.0(Mpa) filtrated & compressed air -10 -- 70℃ 0-6501/mm 88db(A)
G1/4"M12X1.25 Ф6 0-14501/mm 85db(A)
G3/8"M16X1.5 Ф8 0-206001/mm 85db(A)
G1/2"M20X1.5 Ф10 0-39501/mm 83db(A)
G3/4"M27X2 Ф15 0-92001/mm 80db(A)
G1"M33X2 Ф20 0-162401/mm 80db(A)


Wanna know more about above filter and muffler, please feel free to contact us.