FB08G bush is composed of steel backing and sintered with bronze alloy. As the high strength, high load of base material and with high polymer-filled diamond indents. So, it is suitable for bushing and thrust washer applications where the available lubrication is sometimes not adequate. For example, in the starter motor or around the king-pin.
Profile
 1.Solid Lubricant
 
2.Sintered Bronze Alloy

3.Steel backing
 
4.Electro-Plating Copper

Mechanical Performance
Type Tensile (N/mm2) Yield Strength    (N/mm2) Elongation(%) Hardness (HB)
FB08G 420  230 >10 70~90

Physical Characteristic
Type SP,GR
g/cm3		  linear expansion
20~250¡æ  10-6/¡æ		 Heat conductivity
20¡æ    w/ohm*mm2		  Ltroty conductivity
20¡æ   w/m*k 		Elastic modulus
KN/mm2		 Friction coeff
¦Ì
FB08G 7.8 22 76 9 100 <0.08(oil);<0.22(dry)

Load Capability
Type ¡¡ MAX DYNAMIC LOAD 
 (N/mm2)		 MAX SLIDING SPEED
(m/s)		 MAX TEMP
(¡æ)		 WORK CONDITION
FB08G DRY 70 0.4 250 Medium Load; Low Speed
OIL 90 2 200 Medium Load; Medium Speed

Want to know more about our products, please feel free to contact us